Achieving more responsible water use at Arches, France

Achieving more responsible water use at Arches, France

 

Water reserves are falling to worryingly low levels around the world due to climate change. The Arches plant has been reusing treated wastewater since 2003.

 

The challenge of using recycled water in a paper mill

The main content of a pulper to prepare the pulp before it goes on the machine is water. The quality of the water used will hence have a direct impact on the quality of the paper. At the plant in Arches water is normally drawn from the local natural environment: fresh water. Otherwise, the water comes from the wastewater treatment system: recycled water.

 

 

 

Arches is known for the purity of its water

The historical purity of our groundwater is one of the factors in the reputation of Arches and of course it contributes to the quality of the paper we produce. Reusing recycled water required the setting up of an ambitious system of quality control.

“We introduced no less than 15 different parameters to be analysed when testing the quality of recycled water and various other mixtures containing water. We also had to adjust the protocol to the various paper types and businesses,” said Solenne Richard, chemical technician.

 

 

 

Ambitious achievements and long-term objectives

We first started working on optimising the use of recycled water for paper with contactless applications as far back as 2003.   

From 2010 onwards, we gradually started using recycled water to produce abrasive paper backings.

In 2020, an investment of €400,000 made it possible to produce decor paper with recycled water and even  to return recycled water to the ground.

Currently, plant-wide, recycled water meets 55% of our needs, which is equal to 8,440 m3 a day. Our objective for 2022 is to reach 60% and 80% over the longer term.

 

 

 

Water treatment, one of the 7 targets of the abrasives business under the SEAM program

The water recycling rate at the Arches plant is the first of the 7 targets which the abrasives business has set and monitors under the SEAM program.

As a dedicated abrasive paper backing and composite base manufacturer, Ahlstrom-Munksjö is strongly committed to improving the abrasive supply chain and is an active member of the FEPA’s SEAM program, which lays down environmental, social and economic standards for European abrasives manufacturers and aims to help consumers to identify sustainable solutions more easily.